Embedded Devices List

-
ESP8266 - WiFi Module
  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • 1MB Flash Memory
  • Integrated low power 32-bit CPU could be used as application processor
  • SDIO 1.1 / 2.0, SPI, UART

GP2Y0D805Z0F -  Digital Distance Sensor 5cm
  • Output type: digital signal (low when detecting an object, high otherwise)
G5306EADE632EB - BLE Module - iBeacon

  • TTL data transparent transfer between a host Bluetooth device(IOS or Android 4.3)
  • Default Baud Rate: 9600,8,1,n.   
  • Coverage up to 60 meters
  • Built in antenna
GY-88 10DOF IMU - Motion Tracking Module
  • 6-axis Motion Tracking device, that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor(DMP).
  • 3-axis digital compass
  • barometric pressure and temperature measure
  • Gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps)
  • Accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g
  • Wide Magnetic Field range:+/-8 Oe
  • Pressure range:300 to1100hPa 
Flame Detector Module - using infrared radiation detection

MQ-135 - GAS SENSOR

  • suitable for detecting of NH3,NOx, alcohol, Benzene, smoke,CO2 ,etc.

DHT 11 - Humidity & Temperature Sensor
  • response signal of 40-bit data that include the relative humidity and temperature information
  • data protocol is bit complicated and have to handle using software.
https://www.mouser.com/ds/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf

PIR (MOTION) SENSOR
  • detect motion from about 20 feet away

NRF24L01 - 2.4GHz RF Transceiver Module
  • baud rates from 250 kbps up to 2 Mbps
  • range can reach up to 100 meters
  • operating voltage of the module is from 1.9 to 3.6V

MCU - ATTiny2313, Mega32, Mega8

RaspberryPi 3, RaspberryPi 2

LTE/3G GSM,GPS Module - Android Phones
  • low cost than actual module
  • it has lot of senosors - Gyro , Accelerometer
  • it has communication module - (BLE, WiFi, USB) as well








Comments

Post a Comment

Popular posts from this blog

Thread & Locks

-
Image
Threads Threads are subunits of processes, which can be scheduled independently by the operating system scheduler. Multiple threads can be executed at the same time on a single CPU core. The operating system assigns small slices of computing time to each thread, so that it seems to the user as if multiple tasks are executed at the same time. If multiple CPU cores are available, then multiple threads can be executed truly in parallel. We can either use the POSIX thread API, or the Objective-C wrapper around this API, NSThread. NSThread is a simple Objective-C wrapper around pthreads. Grand Central Dispatch With GCD you don’t interact with threads directly anymore. Instead you add blocks of code to queues, and GCD manages a thread pool behind the scenes. GCD decides on which particular thread your code blocks are going to be executed on, and it manages these threads according to the available system resources. This alleviates the problem of too many threads being cre...
Read more

Opengl-es Buffer

-
Image
Framebuffer A  Framebuffer  is a collection of buffers that can be used as the destination for rendering. OpenGL has two kinds of framebuffers: the  Default Framebuffer , which is provided by the  OpenGL Context ; and user-created framebuffers called  Framebuffer Objects  (FBOs). The buffers for default framebuffers are part of the context and usually represent a window or display device. The buffers for FBOs reference images from either  Textures  or  Renderbuffers ; they are never directly visible. Default Framebuffer The Default Framebuffer is the Framebuffer that OpenGL is created with. It is created along with the OpenGL Context. Like Framebuffer Objects , the default framebuffer is a series of images. Unlike FBOs, one of these images usually represents what you actually see on some part of your screen. Framebuffer Object FBO contains a collection of rendering destinations; color, depth and stencil buffer. These logical buff...
Read more

Kernel Startup

-
Image
BootLoader GRUB Version 2 (GRUB) Stage 1 :  boot.img  is stored in the master boot record (MBR) or optionally in any of the  volume boot records  (VBRs), and addresses the next stage by an  LBA48  address (thus, the 1024-cylinder limitation of GRUB legacy is avoided); at installation time it is configured to load the first sector of  core.img . Stage 1.5 :   core.img  is by default written to the sectors between the MBR and the first partition, when these sectors are free and available. For legacy reasons, the first partition of a hard drive does not begin at sector 1 (counting begins with 0) but at sector 63, leaving 62 sectors of empty space not part of any partition or file system, and therefore not prone to any problems related with it. Once executed,  core.img  will load its configuration file and any other modules needed, particularly  file system  drivers; at installation time, it is generated from...
Read more